|
 |
- Adjustable Sensing Range
- Broad Sensing Beam
- Range 2 to 40", or 5 to 80"
- LED Indicator
- Adjustable Hysteresis
- 105-130VAC or 20-30VDC Power Isolated
- N.O. N.C. Solid State Relay
- Limit Switch Style Housing
|
|
|
|
The RPS-150 is a self-contained, wide
beam angle ultrasonic sensor. The advantage of this sensor
is that the target does not have to be at right angles
with the sensor in order to be detected. A flat target
can tilt up to 35 degrees and still be detected. For set-up
purposes an LED indicator is provided. When in the non-detect
state the LED is Green and when in the detect state the
LED is Red. The RPS-150 can be operated in two modes:
a proximity and a hysteresis mode, described below. The
frequency of operation is 38.5kHz. There are two ranges
available in this model: 2" to 40" or 5"
to 80".
The sensor is available with a 120VAC power input or a
20 - 30VDC input. It also features a quick disconnect
receptacle. The housing is constructed of plastic valox
and has standard 30mm X 60mm limit switch mounting dimensions,
as well as side holes for mounting the sensor on its side.
The output consists of two solid state relays N.O. N.C.,
and can switch 2 - 130VAC or VDC up to 100mA DC or 50mA
AC continuous. The relay outputs are short circuit protected
and isolated up to 1500 volts rms. |
|
| Home | Migatron
| Contact Us | |
|
|
